Brother DCP-9040CN Service Manual page 429

< WSW49 >
Selector No.
1
RAM disc size in PCL/ PS
2
3 End-of-copying beep
4
Command flag detection time
5
6
CIS unit warm-up time
adjustment (Not used.)
7
8 Print in black (Not used.)
- Selectors 4 and 5: Command flag detection time
After receiving a command flag, the machine will wait for the command that should follow
for the time length specified by these selectors.
- Selectors 8: Print in black (Not used.)
If any of the color inks have been deleted ("out of ink"), no printing can occur by default. If
this selector is set to "1," in cases of "out of ink" data will be printed only in black ink.
However, in such circumstances, no color data will be printed.
Function
No. 1
No. 4
No. 6
App. 1-54
Setting and Specifications
2
0 0: None
0 1: 1MB
1 0: 2MB
1 1: 4MB
0: Yes 1: No
5
0 0: 150 ms
0 1: 350 ms
1 0: 550 ms
1 1: 750 ms
7
0 0: Not adjusted
0 1: 80 %
1 0: 120 %
1 1: 150 %
0: No (Default) 1: Yes
Confidential