Brother DCP-9040CN Service Manual page 264

Assembling Note:
- Assemble the Develop press drive L ASSY so that the section of the Pull up lever L, where the
spring is hooked is placed as shown in the figure below.
Pull up lever spring (for L)
Section where the spring is hooked
- Catch the harness from the Laser unit onto the Hook as shown in the figure below, and then
assemble the Develop press drive L ASSY.
Fig. 3-188
Hook
Fig. 3-189
3-132
Develop press drive L ASSY
Pull up lever L
Harness from Laser unit
Confidential