Brother DCP-9040CN Service Manual page 50

Hide thumbs Also See for DCP-9040CN:
Table of Contents

Advertisement

Error code BF
Unable to Scan.
Document is too long for duplex scanning. Press Stop key.
Longer document than the specified size is detected in duplex scanning.
Step
1
Document front actuator 2 not
operating smoothly or
catching in some position.
2
Document front sensor 2
failure
Error code C0(K)
Cartridge Error
Put the Black (K) Toner Cartridge back in.
Identification failure for a new toner cartridge (K)
Error code C1(Y)
Cartridge Error
Put the Yellow (Y) Toner Cartridge back in.
Identification failure for a new toner cartridge (Y)
Error code C2(M)
Cartridge Error
Put the Magenta (M) Toner Cartridge back in.
Identification failure for a new toner cartridge (M)
Error code C3(C)
Cartridge Error
Put the Cyan (C) Toner Cartridge back in.
Identification failure for a new toner cartridge (C)
User Check
- Install the toner cartridges into the machine properly.
Step
1
Power off or front cover
opened while detecting a new
toner cartridge
Cause
Correct smooth operation and that there is no
catching of the document front actuator 2.
Replace the document front sensor 2.
Cause
Reset the developing bias voltage and develop
roller counter.
(Refer to
Voltage Counter Reset Function"
1-31
Remedy
Remedy
"2.2 Develop Roller/ Developing Bias
in Chapter 5.)
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-9440cnDcp-9042cdnMfc-9450cdn

Table of Contents