Output Of Transmission Log To The Telephone Line (Function Code 87); Exit From The Maintenance Mode (Function Code 99) - Brother DCP-9040CN Service Manual

1.4.27 Output of Transmission Log to the Telephone Line (Function code 87)

<Function>
This function outputs the transmission log (that the machine has stored about the latest
transmission) to the telephone line. It allows the service personnel to receive the transmission
log of the user's machine at a remote location and use it for analyzing problems arising in the
user's machine.
<Operating Procedure>
(1) If the user's machine has a transmission-related problem, call the user's machine at a
remote location from your machine.
(2) If the line is connected, have the user perform the following:
1) Hook up to the external phone.
2) Press the Menu, Black Start, Menu buttons in this order.
3) Press the 8 and 7 buttons.
The above operation makes the user's machine send CNG to your machine for
sending the transmission log.
(3) If you hear the CNG sent from the user's machine, press the Black Start button of your
machine.
Your machine will start to receive the transmission log from the user's machine.

1.4.28 Exit from the Maintenance Mode (Function code 99)

<Function>
Exit from the Maintenance Mode.
<Operating Procedure>
(1) Press the 9 button twice in the initial stage of the maintenance mode.
(2) The machine exits from the maintenance mode and returns to the ready state.
5-39 Confidential