Brother DCP-9040CN Service Manual page 415

< WSW35 >
Selector No.
1
Max. detection period of dial
tone/busy tone during recording
|
of ICM
4
5
| Not used.
8
Note:
Selectors 1 through 4 are applicable to models equipped with internal TADs.
- Selectors 1 through 4: Max. detection period of dial tone/busy tone during recording of ICM
If the machine (called station) detects dial tone or busy tone exceeding the detection level
specified by selectors 1 through 3 on WSW30 for the period specified by these selectors,
then it disconnects the line.
< WSW36 >
Selector No.
1 ECP mode* (Not used.)
Recovery from Inactive PC
2
Interface (Not used.)
PC Power-off Recognition Time
3
(Not used.)
4 Not used.
5 Escape from phase C
Extension of incoming calling
6
signal (CI) frequency band
|
specified by selectors 1 through
8
4 on WSW14
Note:
Selectors 2 and 3 will become operative if selectors 1 and 2 of WSW46 are set to "monitor" the
PC power ON/OFF state.
Function
No. 1
Function
No. 6
App. 1-40
Setting and Specifications
2 3 4
0 0 0 0: No detection
0 0 0 1: 1 sec.
0 0 1 0: 2 sec.
0 1 0 0: 4 sec.
|
1 1 1 1: 15 sec.
Setting and Specifications
0: ON 1: OFF
0: Disable 1: Enable
0: Normal 1: Long
0: Yes 1: No
7 8
0 0 0: 0 (Ignored)
0 0 1: 4 (448 Hz)
0 1 0: 8 (244 Hz)
0 1 1: 12 (162 Hz)
1 0 0: 16 (122 Hz)
1 0 1: 20 (97 Hz)
1 1 0: 24 (81 Hz)
1 1 1: 28 (69 Hz)
*ECP (Enhanced Capabilities Port)
Confidential