List Of Maintenance Mode Functions - Brother HL-3160CDW Service Manual

1.2

List of Maintenance Mode Functions

Function
code
01
03
09
10
11
12
13
25
32
33
45
46
57
61
66
67
68
69
70
71
72
73
74
77
78
80
82
83
88
91
99
* The maintenance mode functions shaded in the table can be used by end users.
Initialize EEPROM parameters
Transition to shipping state
Monochrome print quality test pattern
Set worker switches (WSW)
Print worker switch (WSW) setting data
Check LCD operation
Check control panel key operation
Display software version
Check sensor operation
Display LAN connection status
Change USB No. return value / Switching dither pattern /
Switching of timing to execute auto registration / Adjust
left-end print position / Adjust upper-end print position /
Change of the transfer current setting / Change of ghost
reduction setting / Change of function switch / Change of
drum developing bias correction value in endurance
deterioration of drum / Switching of black toner discharge
compensation
Adjust printable range for each speed level
Check consumables function
Adjust touch panel
Adjustment of color registration
(Adjustment of inter-color position alignment)
Continuous print test
LED ASSY test pattern print
Print frame pattern (1-sided printing)
Print frame pattern (2-sided printing)
Color test pattern
Sensitivity adjustment of density sensor
Continuous adjustments of density / registration sensor
Configure for country / region and model
Print maintenance information
Check fan operation
Display machine log information
Display machine error code
Developing bias voltage correction
Reset counters for consumable parts
Initialize EEPROM parameters
Quit maintenance mode
Function
5-3
Refer to:
1.3.1 (5-4)
1.3.2 (5-5)
1.3.3 (5-7)
1.3.4 (5-8)
1.3.4 (5-10)
1.3.5 (5-11)
1.3.6 (5-13)
1.3.7 (5-14)
1.3.8 (5-15)
1.3.9 (5-17)
1.3.10 (5-18)
1.3.11 (5-25)
1.3.12 (5-27)
1.3.13 (5-30)
1.3.14 (5-31)
1.3.15 (5-35)
1.3.16 (5-39)
1.3.17 (5-40)
1.3.18 (5-41)
1.3.19 (5-42)
1.3.20 (5-45)
1.3.21 (5-46)
1.3.22 (5-47)
1.3.23 (5-49)
1.3.24 (5-51)
1.3.25 (5-52)
1.3.26 (5-56)
1.3.27 (5-57)
1.3.28 (5-58)
1.3.1 (5-4)
1.3.29 (5-58)
Confidential