8.19 ADF Unit
(1) Turn the ADF unit upside down.
(2) Remove the three cup B M3x10 Taptite screws, and then remove the Hinge ASSY L.
(3) Remove the Hinge arm R from the Hinge base R.
(4) Remove the three cup B M3x10 Taptite screws, and then remove Hinge base R.
Hinge ASSY L
(5) Place the ADF unit the right way up.
(6) Release the two Pins on both sides of ADF cover to remove it while the ADF cover being
opened.
Pin
ADF unit
Taptite, cup B M3x10
ADF unit
<Bottom>
Fig. 3-59
ADF cover
6b
6a
6b
Fig. 3-60
Hinge arm R
6c
3-62
Taptite, cup B M3x10
Hinge base R
Pin
Confidential