Rom Version Check (Function Code 25) - Brother DCP-9040CN Service Manual

Hide thumbs Also See for DCP-9040CN:
Table of Contents

Advertisement

1.4.9 ROM Version Check (Function code 25)

<Function>
This function allows you to check the management information of the software programs such
as version information, check sum.
<Operating Procedure>
(1) Press the 2 and 5 buttons in this order in the initial stage of the maintenance mode.
The machine displays each of terms described below on the LCD.
(2) Press the
TOTAL: Ver A
PCL : Ver1.00*
ENG : Ver1.01
NET : Ver1.00
PICT: Ver1.00
B0608071049:5708*
U0612271600:7B0A*
P0612271602:BD40*
- How to display the check sum information
Terms displayed with "*" have the check sum information as well. Press the OK button
when its version information is displayed on the LCD. Press the OK button again to go
back to the version information display. Press the
Note:
If you press the OK button when each version information of Engine, Network and
PictBridge is displayed on the LCD, you cannot check the check sum information.
(3) To terminate this operation, press the Stop/Exit button. The machine beeps for one
second and returns to the initial stage of the maintenance mode.
or
button to check the next term.
LCD
Main firmware version information (Revision information)
Sub firmware (PCL/PS) version information (ROM size)
Engine firmware version information
Network version information
PictBridge version information
Boot program creation date & check sum information
Main firmware creation date & check sum information
Sub firmware (PCL/PS) creation date & check sum
information
Description
or
5-14
buttons to check the next term.
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-9440cnDcp-9042cdnMfc-9450cdn

Table of Contents