Brother DCP-9040CN Service Manual page 103

(5) Remove the cup S M3x8 Taptite screw and three cup B M4x12 Taptite screws.
(6) Release the three Hooks on the bottom and the two hooks on the back side, and then
remove the Side cover L ASSY.
Note:
When removing the Side cover L ASSY, pay attention to the Wire support rope.
Taptite, cup B M4x12
Hooks
Side cover L ASSY
Taptite, cup S M3x8
(7) Remove the three cup S M3x6 Taptite screws, one cup B M4x12 Taptite screw and one
cup S M4x8 Taptite screw, and then remove the Side plate LB.
Taptite, cup S M4x8
Side plate LB
Taptite, cup B M4x12
Taptite, cup S M3x6
Hook
Hooks
Fig. 2-12
<Left side>
Fig. 2-13
<Left side>
Taptite, cup B M4x12
2-11
Wire support rope
Confidential