Placement Of Scanner Unit Position For Transportation (Function Code 06); Adf Performance Test (Function Code 08) - Brother DCP-9040CN Service Manual

1.4.3 Placement of Scanner Unit in Position for Transportation (Function code 06)
<Function>
This function is to move the scanner unit in position for transportation located at the left end.
When you fix the machine and check its operation, you need to perform this function last before
packing and shipping.
Note:
Please instruct end users to perform this function if possible before packing and shipping their
FAX machine to a sales agent or a service dealer for the purpose of repair. (For the procedure
to allow users to perform maintenance modes, refer to
accessible Maintenance Mode"
<Operating Procedure>
(1) Press the 0 and 6 buttons in this order in the initial stage of the maintenance mode.
The scanner unit moves to the designated position for transportation located at the left
end. The "MAINTENANCE 06" is displayed until the scanner unit is placed in position.
When the scanner unit is placed in the position, the "SCAN LOCK" appears on the LCD.
(2) Press the Stop/Exit button. The machine beeps for one second and returns to the initial
stage of the maintenance mode.
Note:
- If it is impossible to move the scanner unit in position for transportation, or if this function is
performed while a scanning error is occurring, the "SCAN LOCK ERROR" appears on the
LCD.
- You can not perform the scanning operation such as copying after moving the scanner unit
into the position for transportation.

1.4.4 ADF Performance Test (Function code 08)

<Function>
The machine counts the documents fed by the automatic document feeder (ADF) and displays
the count on the LCD for checking of the ADF performance.
<Operating Procedure>
(1) Set documents. (Allowable up to the ADF capacity.)
The "DOC. READY" will appear on the LCD.
(2) Press the 0 and 8 buttons in this order.
While counting the documents, the machine feeds them in and out, displaying the current
count on the LCD as shown below.
(3) Press the Stop/Exit button so that the machine beeps for one second and returns to the
initial stage of the maintenance mode.
in this chapter.
Current count (1st page in this example)
5-7
"1.2 How to Enter the End User-
Confidential