Switching Of The Usb Transfer Speed In The Pictbridge Mode (Function Code 45) - Brother DCP-9040CN Service Manual

1.4.12 Switching of the USB Transfer Speed in the PictBridge Mode (Function code 45)

<Function>
This function allows you to change the USB transfer speed in the PictBridge mode. If the
digital camera which a user uses cannot be connected in the PictBridge mode, it may be
possible by changing the speed setting.
- PB.Speed=AUTO: Sets the speed depending on the USB device performance. (Full
- PB.Speed=FULL: Fixes the speed to Full Speed regardless of the USB device
(An asterisk (*) appears beside the function to be currently set.)
<Operating Procedure>
(1) Press the 4 and 5 buttons in this order in the initial stage of the maintenance mode.
The "PB.USBspeed" will appear on the LCD.
(2) Press the OK button. Press the
and press the OK button. Then, the machine beeps for one second and returns to the
initial stage of the maintenance mode.
Note:
The setting will be enabled after turning the power switch of the machine off and on.
Speed or High Speed)
performance.
or
5-20
button to select the function you want to set
Confidential