Product Description - ABB Tina 2A Product Manual

3

Product description

Tina 2A and Tina 2B are used to adapt safety devices with zero-volt contacts to the DYNlink
safety circuit monitored by a safety controller or a safety PLC. Examples of such safety
devices are emergency stops and switches or light curtains and light beams with internal
relay outputs.
Tina 2A is intended for safety devices prepared with a M20 entry. This allows easy installation
of the adapter unit within the physical enclosure of the safety device while keeping the status
LED visible on the outside of the housing.
Tina 2A/2B is equipped with a LED for visual status information of the safety device and the
DYNlink safety circuit.
Tina 2B has a very small form factor which allows installation inside the physical enclosure of
small safety devices, or safety devices without a M20 entry.
The Tina 2A/2B adapter unit is intended for use in safety circuits in accordance with
EN 60204-1.
2TLC172121M0201 Rev.E
6