Table of Contents
Advertisement
3.8
Alarm Setting
In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to
remove the selected alarm setting, click OK to exit and save the setting, Cancel to exit without
saving.
(1)
(2)
(3)
(4)
(5)
(6)
1. Click Add to insert and set a new alarm setting. Click the items in the (8) Alarm Setting List if
you want to modify the alarm setting.
2. In (1) No./Name/Description enter alarm name and description. Alarm No. will be created by
DVR system.
3. In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Select the
time and click the block you want to activate or deactivate the alarm function. When it is
deactivated the color of the block turns white.
4. In (3) Conditions, you can set "Trigger if any" to activate if it falls to one of the conditions or
"Trigger if all" to activate if it falls to all conditions.
5. In (4) Camera section, select and click on the camera number (01 to 08) in Motion Detected
and Video Loss to set the condition for the system to alarm.
6. In (5) Sensor, select and click on the sensor number to set the condition for the system to alarm.
If the sensor normal status is high, set the sensor condition to low.
-
Continue trigger duration: Set a time period that when sensor has been trigger and stay in
the same status for that period, then the alarm will be sent out.
7. In (6) Alarm Reset, click the camera number to set the reset condition of alarm. Once alarm is
reset, all alarm action will stop at the moment. If the sensor normal status is high, set the alarm
reset condition to low.
8. In (7) Action, you may now set the alarm action for the system to perform when the alarm
condition is activated.
- Enlarge Camera View
Switch to only display video in Preview mode from where the alarm is activated.
a. Select the camera from drop down list to specify which camera video to be enlarged on
screen when the alarm is triggered.
(7)
34
(8)
Advertisement
Table of Contents
