To Use Istable - Avermedia AVerDiGi EXR6008 User Manual

Name
(12) Noise Reduce
(13) Sharpness
(14) Effects
(15) Picture
Adjustment
(16) Original Screen
(17) Temporary
Setting Block
(18) Status Bar
(19) Progress Bar
(20) iStable
(21) Add Setting
(22) Rename
(23) Delete
(24) Load Setting
(25) Save Setting
4.1

To Use iStable

The iStable function can reduce the jolt in the recorded video.
1. Click Open File button and select the
recorded video.
2. And then, click iStable button.
3. iStable windows will show up.
4. Select the smoothness level – 1(Low), 2,
3, 4, and 5(High). The default value is 3.
5. Click Play button, and then iStable function
will start to initial the recorded video.
6. When the initialize is done, user will see
the original and stabilized recorded video
play in two windows. The original video on
the right side of window and the stabilized
video on the left side of window.
Function
Adjust the softness and repair the damaged colours.
Improve the overall image by enhancing edges. This gives the image more
depth.
Gray Scale: convert the image into black and white (monochrome).
Normalize: adjust the brightness intensity.
Equalize: automatically adjust the images that are too dark.
De-interlace: smooth out the overlying frames.
Static: de-interlace for motionless scene.
Dynamic: de-interlace for moving scene.
Adjust the Brightness, Contrast, Saturation, Hue and Gamma.
Display the original state of the image.
Display the sample settings. Click the sample to apply the setting on the
current video.
Display the date, and time of the video.
Show the progress of the file being played. You may move the bar to seek at
any location of the track.
To reduce the jolt in the recorded video.(also see
Include the new setting to the temporary setting block.
Change the name of the selected setting in the temporary setting block.
Permanently remove the selected setting in the temporary setting block.
Call the saved settings.
Store the settings in the temporary setting block.
40
Chapter 7.1)