Table of Contents
Advertisement
4.8 Relay Setting
The I/O device must be installed to use this function.
To set the Relay Setting:
1.
Click the drop-down list and select the relay ID number.
2.
Enter relay name.
3.
The system automatically detects the card and input number. In the Content
section, enter relay description.
4.
In the test section, click Test to trigger relay. Red is high and Green is low.
5.
Click OK to exit and accept the setting and Cancel to exit without saving the
setting.
4.9 Alarm Setting
In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click
Delete to remove the selected alarm setting, click OK to exit and save the setting,
Cancel to exit without saving, and Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
To set the Alarm Setting:
1.
Click Add to insert and set a new alarm setting. Click the items in the (7) Alarm
Setting List , if you want to modify the alarm setting.
2.
In (1) Alarm Setting number/Name/Description , display the selected alarm
setting number in the list below. Enter alarm name and description.
(6)
33
(7)
Advertisement
Table of Contents
