1.5.2 Install Internal SATA Hard Disk
User can install up to 3 SATA hard disks inside the DVR unit if it is necessary. Please follow the
below steps to install the hard disk.
1. Loosen all screws and push the cover backward
and lift
3. Take out the hard disk rack from DVR unit and
slide the hard disk into it.
5. Plug the SATA cable into SATA connector on the
PC board
2. Loosen the screws of holder in order to take out
the hard disk rack.
4. Secure the hard disk both side
6. Plug the power cable into hard disk
8