Alarm Setting; To Setup An Alarm Condition - Avermedia AVerDiGi EB1304 NET Operation Manual

i
When the setup mode is active in E-Map interface, the setup mode will not
work in CMS main application.
To switch back the setup mode in CMS main application, click OK or Cancel
to exit the setup mode in E-Map interface.
6. User can click the Map icon on the map to view the map. And the map can be
added map on map and up to 64 maps. (see

9.4.5 Alarm Setting

In the Alarm Setting dialog box, just select and enable the condition for the system to
alarm and the action for the system to perform when an alarm is activated. User can
setup a total of 16 different combinations of alarm settings. Each alarm setting can apply
to several DVR servers. Click OK to accept new setting and Cancel to exit without
saving.

9.4.5.1 To setup an alarm condition

1. Click the Add button to add a new alarm condition.
2. Give the name of this alarm condition.
3. Fill the simply description of this alarm condition in Description column.
4. Select the Conditions.
5. Select the Action. ( see also
6. Apply to the DVR server, click Select DVR. In Select DVR window, select the DVR
server and click Add. To exit and save the setup, click OK.
9.4.5.1.1 To Setup the Send E-Mail Setting
Beside the Send Email check box, click Detail. In the E-mail Setting dialog box,
Add a New
9.4.5.1.1 & 9.4.5.1.2
58
Map).
& 9.4.5.1.3 )