Alarm Setting - Avermedia SA5104 User Manual

4.9

Alarm Setting

In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the
selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to
revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
To set the Alarm Setting:
1. Click Add to insert and set a new alarm setting. Click the items in the (7) Alarm Setting List, if you
want to modify the alarm setting.
2. In (1) Alarm Setting number/Name/Description, display the selected alarm setting number in the list
below. Enter alarm name and description.
3. In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Select the time and
click the block you want to activate or deactivate the alarm function. When it is deactivated the color of
the block turns white.
4. In (3) Conditions, you can set "Trigger if any" to activate if it falls to one of the conditions or "Trigger if
all" to activate if it falls to all conditions.
In Camera section, select and click on the camera number (01 to 16) in Motion Detected and
-
Video Loss to set the condition for the system to alarm.
In Missing and Suspicious Object Detected, click the camera number (01 to 16)and select the
-
certain object on the screen (right click on camera number for detailed setting)), and when the
certain object is missing or doubtful, the system will alarm.(see also
In Scene Change, click the camera number (01 to 16) and when the camera is been moved, the
-
system will alarm.
5. In (4) Sensor, select and click on the sensor number (01 to 16) to set the condition for the system to
alarm. If the sensor normal status is high, set the sensor condition to low (see
Click IP Camera Sensor to configure sensor status of IP camera. Click High/Low to set sensor status
to high or low.
(6)
74
(7)
Chapter 4.9.12)
Chapter 4.7 step #4).