Table of Contents
Advertisement
5.2
Familiarizing the Remote Console Buttons
(1)
(2)
Name
(1) DirectDraw
Direct Draw function supports for certain VGA card. For more information, please contact your
i
VGA card vendor.
(2) Exit
(3) Audio button
(4) Split Screen Mode
i
If there are only 8 cameras, you won't be able to switch to 16, and 13 split screen mode.
(5) Record
(6) Network
(7) Setup
(8) PTZ
(9) Preview
(10) Playback
(11) Status Bar
(12) Camera ID
(13) Event Log
(14) Snapshot
(15) Full screen
(3)
(4)
Function
Enhance the video quality.
Close the Remote Console.
Enable/disable the sound.
Select from 4 different split screen type to playback the recorded video file of
all the camera, or one camera over the other or alongside on a single screen.
Start/stop video recording.
Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection.
Configure the Remote Console setting. (see also
Access PTZ control panel. EXR supports IP camera PTZ function.(see
Chapter
5.3)
Switch to Preview/Playback mode. This allows you to view live camera
display.
Switch to Playback mode. This allows you to view the recorded video file.
(see also
Chapter
Display the current date, time and hard disk free space.
Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.
Display the Event logs, Operation logs, System logs, and Network logs.
Capture and save the screen shot either in *.jpg or *.bmp format.
Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.
(5)
(6)
(7)
5.4)
44
(16)
(15)
(14)
(13)
(12)
(11)
(10)
(8)
(9)
Chapter
5.2.1)
Advertisement
Table of Contents
