Table of Contents
Advertisement
5.
When the Event list appear, click and select the item you want to view.
3.5.3 To Search Using the Intelligent Search
1. Click on the video screen on where you want to search.
2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner
of the screen.
3. When the Intelligent Search Setting dialog box and motion detector frame appear, you may
adjust the sensitivity bar and the motion detector frame size and location. To set motion detector
frame size and location, left click and drag on the screen. Then, click OK to start searching. The
video search would stop at the frame that matches the condition. To keep on searching click
You may also set to search and list all the result. Just check the List box. In the Search Duration
section, set the Begin Time, End Time and Searching Interval. Then, click OK to start
searching.
3.6
Sensor Setting
The I/O device must be installed to use this function.
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name in Name column.
3. The system automatically detects the card and input number. In the
Content section, enter Description of sensor.
4. In the test section, click Test to check the sensor status. Red is
high and Green is low.
5. Click OK to exit and accept the setting and Cancel to exit without
saving the setting.
32
.
Advertisement
Table of Contents
