Alarm Setting - Avermedia NV 3000 User Manual

exit without saving the setting.
5.9

Alarm Setting

In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click
Delete to remove the selected alarm setting, click OK to exit and save the setting,
Cancel to exit without saving, and Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
To set the Alarm Setting:
1. Click Add to insert and set a new alarm setting. Click the items in the (7) Alarm
Setting List , if you want to modify the alarm setting.
2. In (1) Alarm Setting number/Name/Description , display the selected alarm
setting number in the list below. Enter alarm name and description.
3. In (2) Enable Time , the number from 00 to 23 represent the time in 24-hour clock.
Select the time and click the block you want to activate or deactivate the alarm
function. When it is deactivated the color of the block turns white.
4. In (3) Conditions , you can set " Trigger if any " to activate if it falls to one of the
conditions or " Trigger if all " to activate if it falls to all conditions.
- In Camera section, select and click on the camera number (01 to 16) in
Motion Detected and Video Loss to set the condition for the system to
alarm.
- In Missing and Suspicious Object Detected , click the camera number
(01 to 16)and select the certain object on the screen (right click on camera
number for detailed setting)), and when the certain object is missing or
doubtful, the system will alarm.(see also Chapter 5.9.12)
- In Scene Change , click the camera number (01 to 16) and when the
camera is been moved, the system will alarm.
5. In (4) Sensor , select and click on the sensor number (01 to 16) to set the
Chapter 5 Customizing NV DVR System
(6)
53
(7)