Table of Contents
Advertisement
The hard disk must be formatted before user can use it with DVR unit. Following the below steps
5.
to format the hard disk.
a.
Click Setup and enter the password
Click System → Add
b.
c.
Select the hard disk from device list and select Format type
d.
Click Format button to start formatting
e.
When formatting is done, click OK.
Setup the date and time in order to have correct recording time and date. Following the below
6.
steps to setup date and time:
a.
Click Setup and enter the password
b.
In Time section, click Setting button of System Time.
c.
Select the date and adjust the time, and then, click OK.
Connecting the IP camera. Following the below steps to connect the IP camera.
7.
Click Setup → Camera
a.
b.
Select camera icon and enable the camera
c.
Click IP Setting
d.
Enable Protocol, and then, select protocol, mode, video format, resolution, and
channel of IP camera.
e.
Enter IP address or URL of IP camera.
f.
Enter ID and password if IP camera's access authority is required.
g.
Click OK.
h.
To connect another IP camera, follow the above steps.
15
Advertisement
Table of Contents
