Table of Contents
Advertisement
(10) Time
Adjust the DVR system time and date. Click Setting to select the month, date, hour, and minute.
Mark Daylight saving check box to enable daylight saving function. And then, select the Start and
End Time by click Setting. Assign a time that it is for daylight saving time offset in your time zone.
For example: if the time zone is in U.S. Eastern, the time offset is 1 hour.
(11) Firmware
Upgrading the firmware of DVR system.
Click Update button, a Firmware Upgrade windows will show up.
1.
The local site of DVR only supports upgrade from the USB disk.
2.
Save the firmware on USB root direction of USB disk. And then, plug USB disk into DVR unit.
3.
Select the USB disk if there is more than one USB disk from drop down list. The DVR unit will
4.
auto detects the firmware.
Click OK to start upgrading.
5.
23
Advertisement
Table of Contents
