Table of Contents
Advertisement
DHCP: Assign the IP address by local DHCP server to DVR system.
PPPOE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP
frames in Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL
service connecting to internet, and then, select PPPOE mode. Enter User ID and password
that is given by your ISP for PPPOE connecting authority.
DDNS: DDNS(Dynamic Domain Name Service) is a data query service mainly used on the
Internet for translating domain names into Internet addresses. Users can register their own
domain name on http://ddns.avers.com.tw. (See
-
Domain Name
Enter the domain name that user has registered.
Password
-
A password use to access DDNS that user has setup when register the domain name
(4) Remote Upgrade Configuration
A port is using for the remote firmware upgrade through network.
(5) WebViewer Configuration
Activate Enable Anonymous Login to remotely access the DVR server without the need of
password
(6) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address or
domain name and select the Time Zone. User can enable Automatic Synchronize at to set
automatic synchronize time on a daily basis. Or, user can click Synchronize Time Right Now to
adjust time right away.
3.5
Backup Setup
In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The
numbers from 01 to 08 represent the camera number. When you back up the file, you may find
Qplayer application included in the backup folder. User need to execute the Qplayer installation on
PC for playback.(see also
1. Select the date of the recorded file in the calendar you want to backup. Use
Chapter
3.5.1)
Appendix
A)
28
and
buttons
Advertisement
Table of Contents
