Table of Contents
Advertisement
b. Retrieve time: set the waiting duration before system switching back to original Preview
mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch
back to Preview mode manually. The retrieve time range is 0~ 600 seconds.
- Relay Output
Set to enable/disable the relay operation when the
alarm is activated and to extend additional time in
second before it stops the relay operation.
1. Beside the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the
available relay list and in the ON column, set to
enable/disable the relay operation when the alarm
is activated.
3. In the Retrieve time check box, you may
enable/disable to extend the relay operation time
and set the duration in second.
4. Click OK to exit and accept the setting and Cancel
to exit without saving the setting.
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit
without saving the setting.
(1)
(2)
(3)
35
Advertisement
Table of Contents
