Resizing Originals By Entering A Scaling Value (Mac Os X) - Canon imagePROGRAF iPF765 User Manual

Resizing Originals by Entering a Scaling Value (Mac OS X)

12
F
Click Scaling and enter 120.
•
Note
•
13
Confirm the print settings and print as desired.
•
Note

Resizing Originals by Entering a Scaling Value (Mac OS X)

Resizing Originals by Entering a Scaling Value (Mac OS X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-
ple.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
Paper: Roll paper
•
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
82
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right
edges of the paper will not be printed.
If the original size after enlargement or reduction is smaller
than the paper size, the original is printed in the upper-left
corner. In this case, you can center originals by selecting
E
Print Centered on the Layout sheet.
For tips on confirming print settings, see " Confirming Print Settings(Windows) "
→P.179
User's Guide
iPF765