Canon imagePROGRAF iPF765 User Manual page 507

iPF765
Interface TCP/IP IPv4
Setup
IPv6
NetWare NetWare
Frame Type
Print Service
AppleTalk
Ethernet Auto Detect
Driver
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Interface Print
Return Defaults
System Sleep Timer
Setup
Shut Down Timer
Buzzer
Contrast Adj.
User's Guide
Setting Item
IPv4 Set-
Default G/W
tings
DNS Set- DNS Dync update
tings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS Set- DNS
tings Dync up-
date
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
Specify whether DNS server registration is updated automati-
cally.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated automati-
Addr cally.
Stateless
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes, choose
Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To apply your
changes, choose Register Setting.
Specify the communication method. To apply your changes,
choose Register Setting.
Choose On for automatic configuration of the LAN communica-
tion protocol. Choose Off to use settings values of
Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported over the
LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the default
values.
Specify the period before the printer enters sleep mode.
Sets the time until the printer turns off automatically. If no oper-
ations are performed on the printer for the duration of the time
set in Shut Down Timer after entering Sleep mode, the printer
automatically turns off.
Choose On for the buzzer to sound in case of errors.
Adjust the Display Screen contrast level.
Description, Instructions
Menu Settings
507