Hp-Gl/2 Jobs Are Printed At Maximum Size, Even If A Standard Size Is Specified; Hp-Gl/2 Printing Takes A Long Time; The Printer Stops When Printing A Hp-Gl/2 Job (The Carriage Stops Moving) - Canon imagePROGRAF iPF765 User Manual

iPF765

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.

HP-GL/2 printing takes a long time

HP-GL/2 printing takes a long time
Large print jobs with a lot of data take longer to print.
A job was printed when Input Resolution in the Control Panel
menu was set to 600dpi.

The printer stops when printing a HP-GL/2 job (the carriage stops moving)

The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer is analyzing the print job.
A job was printed when Input Resolution in the Control Panel
menu was set to 600dpi.
User's Guide
Cause
Cause
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Corrective Action
In the Control Panel menu, set PageSizeProcess2 or Conserve Paper to On.
The layout will be changed to the optimal layout.
(See "Menu Settings.")
→P.500
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.")
→P.500
Corrective Action
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print again.
(See "Menu Settings.")
→P.500
Corrective Action
677