Canon imagePROGRAF iPF765 User Manual page 504

Menu Settings
Adjust Feed Pri-
Printer ority
Mainte- Head Cleaning
nance
Nozzle Check
Replace P.head
Repl. maint cart
Head Info
GL2 Set- Quality
tings Manager
Paper
Manager
504
Setting Item
Adjust Adjust- A:High
Length ment-
B:Standard/Draft
Print
Change A:High
Settings
B:Standard/Draft
Color Monochrome
Mode
Color (CAD) 1
Color (CAD) 2
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Print Quality
Input Resolution
Print (Economy)
Paper Source
Margin
Conserve Paper
Description, Instructions
Print a test pattern for particular types of paper to compensate
for paper stretching or shrinkage, after which you enter the
amount of adjustment. (See "Adjusting Line Length (Adjust
Length).")
→P.616
Displayed when you have selected Feed Priority > Adj. Prior-
ity > Print Length.
Adjustment relative to the amount of stretching or shrinkage of
the current paper.
Enter either the adjustment results from AdjustmentPrint or
the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount by
choosing a higher adjustment value. For paper that tends to
shrink, decrease the feed amount by choosing a lower adjust-
ment value.
Clean the Printhead. (See "Cleaning the Printhead.")
→P.628
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if printing
is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
When replacing the Printhead, choose Yes and follow the in-
structions on the screen. (See "Replacing the Printhead.")
→P.629
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose Yes and
follow the instructions on the screen. (See "Replacing the
Maintenance Cartridge.")
→P.636
Indicates information about the printhead.
Print in monochrome.
Print in standard colors.
Print in brighter colors.
Print emulating the following printers, in colors resembling col-
ors produced by these printers: Canon iPF500, iPF600,
iPF700, iPF510, iPF610, iPF710, iPF605, iPF720, iPF810,
iPF815, iPF820, and iPF825. ( *2 )
Print emulating the HP Designjet 500/800, in colors resembling
colors produced by these printers.( *2 )
Print emulating the HP Designjet 1000, in colors resembling
colors produced by this printer.( *2 )
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
Although printing quality is diminished, less ink is consumed
than in regular printing. Select On to conserve ink.
Choose the source of paper for HP-GL/2 printing.
Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in Paper
Details, the value in Paper Details has priority.
Conserves paper when printing.
iPF765
User's Guide