Messages Regarding Printheads; Cannot Adjust Printhead; Wrong Printhead; Printhead Error - Canon imagePROGRAF iPF765 User Manual

Cannot adjust printhead.

Messages regarding printheads

Messages regarding printheads

Cannot adjust printhead. .................................................................................................................................... 698

Wrong printhead. ............................................................................................................................................... 698

Printhead error ................................................................................................................................................... 698

No printhead ...................................................................................................................................................... 698

Execute printhead cleaning. .............................................................................................................................. 698

Cannot adjust printhead. Cannot adjust printhead.
Cause
The Printhead nozzles are clogged.
The Printhead cannot be aligned; highly
transparent film is loaded.
The Printhead is installed crooked.
Wrong printhead.
Wrong printhead.
An incompatible Printhead has been installed.
Printhead error
Printhead error
Cause
There is a problem with the Printhead.
No printhead
No printhead
Cause
No Printhead is installed.
698 Execute printhead cleaning.
Execute printhead cleaning.
Cause
The Printhead noz-
zles are clogged.
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Straighten the Printhead as follows, and then execute Head Posi. Adj. again.
1.
Press the OK button to clear the error.
2.
Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
3.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Cause
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Corrective Action
Install the Printhead.
(See "Replacing the Printhead.")
Follow these steps to clean the Printhead.
Corrective Action
→P.627
→P.628
Corrective Action
→P.629
Corrective Action
→P.629
→P.629
Corrective Action
→P.604
→P.604
→P.607
→P.604
User's Guide
iPF765