Other Problems; The Printer Does Not Go On; The Printer Takes Time To Start Up - Canon imagePROGRAF iPF765 User Manual

The printer does not go on

Other problems

Other problems

The printer does not go on ................................................................................................................................. 678

The printer takes time to start up ....................................................................................................................... 678

If the Printer Makes a Strange Sound ................................................................................................................ 679
Messages advising to check the maintenance cartridge are not cleared ......................................................... 679
The printer consumes a lot of ink ....................................................................................................................... 679
Ink Level Detection ............................................................................................................................................. 679
The printer does not go on
The printer does not go on
Cause
The printer is unplugged.
The specified voltage is not supplied.
The printer takes time to start up
The printer takes time to start up
The printer may have shut down incorrectly last time. This may happen af-
ter power outages or if the printer is unplugged before it is turned off.
In this case, the next time power is restored, the printer's hard disk is
checked, and startup may take some time.
678
Corrective Action
Plug the power cord into the outlet, and then turn on the printer.
Check the voltage of the outlet and breaker.
(See "Specifications.")
→P.708
Cause Corrective Action
Please wait a while, because it may take several minutes to fin-
ish checking the hard disk.
If an error message is displayed after the hard disk check, follow
the instructions indicated to resolve the problem.
iPF765
User's Guide