iPF765
Printing does not start
Printing does not start
The Data lamp on the Control Panel does not light up ...................................................................................... 663
The printer does not respond even if print jobs are sent ................................................................................... 663
Ink Filling.. is displayed ...................................................................................................................................... 663
The display screen indicates Agitating .............................................................................................................. 663
The Data lamp on the Control Panel does not light up
The Data lamp on the Control Panel does not light up
Cause
The printer is not on.
The target printer was not
selected when printing.
The print job is paused.
The printer does not respond even if print jobs are sent
The printer does not respond even if print jobs are sent
In the Control Panel menu, Pause Print is On.
In the Control Panel menu, Use USB or Use Ethernet is set to
Off.
You have selected Save in mail box in Output Method on the
printer.
Print jobs are pending.
Ink Filling.. is displayed
Ink Filling.. is displayed
Cause
The printer was forced off during opera-
tion.
The display screen indicates Agitating
The display screen indicates Agitating
Cause
Ink agitation is in pro-
gress.
User's Guide
Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the list of Printer, and try printing
again.
In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or Printers) window.
2.
Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1.
Click Print & Fax. (This is identified as Printer Setup Utility or Print Center in other versions of Mac OS
X.)
2.
Select the printer, and then Resume Printer (or Start Jobs) in the Printers menu to restart the print job.
Cause
Wait until the system has been filled with ink. This process may take about seven and a half mi-
nutes.
Please wait until ink agitation is finished.
The time for agitation varies depending on how long the printer has been off. (Between about 30 seconds and two
minutes.)
The Data lamp on the Control Panel does not light up
Corrective Action
Corrective Action
Set Pause Print to Off.
(See "Pausing Printing.")
→P.32
Set Use USB or Use Ethernet to On.
(See "Menu Settings.")
→P.500
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
→P.571
Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")
Corrective Action
Corrective Action
→P.569
663