Other Settings; Specifying Printer-Related Information - Canon imagePROGRAF iPF765 User Manual

Specifying Printer-Related Information

Other Settings

Other Settings
Specifying Printer-Related Information .............................................................................................................. 558
Configuring the Communication Mode Manually ............................................................................................... 559
Email Notification When Printing is Finished or Errors Occur ............................................................................ 560
Initializing the Network Settings ......................................................................................................................... 560
Specifying Printer-Related Information Specifying Printer-Related Information
Follow the steps below to specify device information and security settings.
1
Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
3
If a password has been set on the printer, enter the password.
4
Click Information in the Device Manager menu at left to display the Information page.
5
To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security,
depending on what information you want to specify.
To change the administrator password, click the Change Password button in the Security group.
6
Refer to the table of settings for device information and security as you complete these settings.
Security setting items are displayed when you click the Change Password button in the Security group.
Device Information Settings
Device Name
Location
Administrator
Phone
Comments(E-mail)
Security Settings
New Password
Confirm
*1: On the Security settings screen, besides entering a password, you can specify other security-related information, such as IP
address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP authentication set-
558
tings.
7
Click OK to activate the settings.
Item
Enter a device name.
(0–32 characters)
Enter the location where the device is installed.
(0–32 characters)
Enter the administrator's name.
(0–32 characters)
Enter the administrator's contact information.
(0–32 characters)
Enter any comments regarding the administrator.
(0–32 characters)
Item
Enter the new password.
(0-9999999)
Enter the new password again to confirm it.
(0-9999999)
Details
Details
iPF765
Default Setting
blank
blank
blank
blank
blank
Default Setting
blank
blank
User's Guide