Cleaning The Printer; Cleaning The Printer Exterior; Cleaning Inside The Top Cover - Canon imagePROGRAF iPF765 User Manual

Cleaning the Printer Exterior

Cleaning the Printer

Cleaning the Printer

Cleaning the Printer Exterior .............................................................................................................................. 642

Cleaning Inside the Top Cover .......................................................................................................................... 642

Cleaning the Printer Exterior
Cleaning the Printer Exterior
Clean the printer regularly to maintain better printing quality and help prevent problems.
To ensure a comfortable working environment, clean the printer exterior about once a month.
1
Turn the printer off. (See "Turning the Printer On and Off.")
2
Unplug the power cord from the outlet.
•
Caution
3
Using a damp cloth that you have wrung out completely, wipe
the exterior surfaces of the printer. Dry the surfaces with a dry
cloth.
•
Caution
Important
4
Plug the power cord into the outlet.
Cleaning Inside the Top Cover Cleaning Inside the Top Cover
Clean inside the Top Cover about once a month to maintain better printing quality and help prevent problems.
Also clean inside the Top Cover in the following situations to ensure optimal operation.
• If the printed surface or the underside of paper is dirty after printing
• After you have used up a roll
• After borderless printing
After printing on small paper
•
• After printing on paper that generates a lot of cutting debris
• If you have replaced the roll
After printing on paper that generates a lot of paper dust
•
• After printing on adhesive paper
642
Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the print-
er on poses a risk of injury if you touch moving parts inside the printer.
Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into contact with elec-
trical components inside the printer, there is a risk of fire or electrical shock.
•
If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend cleaning the
Ejection Guide even if it does not appear dirty, because it may actually be covered with paper dust.
→P.19
iPF765
User's Guide