Register The Settings (Powerpoint) - Canon imagePROGRAF iPF765 User Manual

Register the settings (PowerPoint)

7
Select Next.
8
Select Media Type.
9
Select Print Range from All Slides, Current Slide, and Slides.
If Slides is selected, enter the slide number.
10
Enter Copies.
•
•
Note
•
•
•
11
Press Print to start printing.

Register the settings (PowerPoint)

Register the settings (PowerPoint)
If you are going to print multiple times using the same setting, you can select One-Touch Registration. Registered
settings can be recalled from Print Using Registered Settings.
1
Set up to the Print screen from Print Matching Roll Width, Borderless Printing or Multi-Page Printing of
Printing Menu.
•
•
Note
280
When Print in Draft mode is selected, printing is fast but the print quality is poor.
When Saturation is selected, you can print posters, etc., vividly.
The settings are registered when the One-Touch Registration is pressed. This is convenient if you to need print
multiple times using the same setting.
Press the Print Preview button to display the preview screen. You can check and make changes to the layout in the
preview screen.
The maximum length for Multi-Page Printing is the lesser of 14.22 times the roll paper width, or 18.0m.
Up to 20 items can be registered.
The available settings are as follows.
•
Print Matching Roll Width (PowerPoint)
•
Borderless Printing (PowerPoint)
•
Multi-Page Printing (PowerPoint)
→P.274
→P.276
→P.279
iPF765
User's Guide