Canon imagePROGRAF iPF765 User Manual page 508

Menu Settings
System
Date &
Setup
Time
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
Paper
Size Ba-
sis
Keep Paper Size
508
Setting Item
Date
Time
Roll Selection 1
Roll Selection 2
Description, Instructions
Set the current date.
Set the current time. Available only if the Date setting is speci-
fied.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a main city
in this time zone and the difference from Greenwich Mean
Time.
Choose the display unit for length. Change the unit displayed
for the remaining amount of roll paper, Tot.Print Area, and so
on.
Specify printing behavior if the type and size of paper specified
in the printer menu does not match the type and size in the
printer driver.
Choose Pause to have printing paused under these circum-
stances. Choose Warning to continue printing after notifica-
tion. Choose None to continue printing without notification.
Choose Hold Job to store jobs with mismatched types and
sizes of paper on the printer hard disk, in a print queue await-
ing processing. (See "Using the Printer Hard Disk.")
If roll size detection is activated, choose whether ISO A3
(297mm) or 300mm Roll is applied when a roll of an inter-
mediate width is detected.
If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when a roll of an inter-
mediate width is detected.
Choose On to use the paper size setting as the basis for print-
ing instead of other settings. The margin setting of the printer
menu will be used instead of the margin setting of the printer
driver if the latter is smaller, which may prevent text or images
in the margin from being printed.
Choose Off to give priority to margin settings. The larger value
is used if the margin specified in the printer driver does not
match the margin in the printer menu
iPF765
→P.562
User's Guide