Download  Print this page

Accessing Hp Vision Diagnostics On The Computer; Creating And Using A Bootable Usb Key; Creating And Using A Bootable Dvd; Using The Hp Memory Test Utility - HP Z200 Maintenance And Service Manual

Small form factor workstation.
Hide thumbs

Advertisement

Accessing HP Vision Diagnostics on the computer

The following procedures describe how to access the HP Vision Diagnostics utilities that are included in
the computer software.

Creating and using a bootable USB key

This section describes how to use a USB key to access the HP Vision Diagnostics.
NOTE:
Using a USB key is the most convenient method to access the HP Vision Diagnostics.
1.
In the C:\VisionDiagnostics\ directory, double-click on VisionDiagUSB.exe. A setup menu
appears.
2.
Follow the setup prompts to create a bootable ISO image of the diagnostic utilities on a USB key.
3.
Turn off the computer and restart it with the USB key installed. The computer will boot to the USB
key and initiate the HP Vision Diagnostics utility.
4.
Follow the HP Vision Diagnostic prompts to troubleshoot the computer.

Creating and using a bootable DVD

This section describes how to use a DVD to access the HP Vision Diagnostics.
1.
In the C:\VisionDiagnostics\ directory, double-click on the VisionDiagISO.exe file. A setup menu
appears.
2.
Follow the setup prompts to create a bootable ISO image of the diagnostic utilities on a DVD.
3.
Enable the computer to boot from DVD.
4.
Turn off the computer and restart it with the DVD installed in the optical drive. The computer will
boot to the DVD and initiate the HP Vision Diagnostics utility.
5.
Follow the HP Vision Diagnostic prompts to troubleshoot the computer.

Using the HP Memory Test utility

This section describes how to access the HP Memory Test utility.
NOTE:
The HP Memory Test is a comprehensive memory diagnostic utility that is run as a stand-alone
application, outside of HP Vision Diagnostics.
If the computer is booted from a CD, a separate boot CD will be required to use the memory
diagnostic. Hence, HP recommends that a USB key be used to boot the diagnostic utilities. It is faster
than using a CD, and it accommodates both Memory and Vision diagnostics.
1.
In the C:\VisionDiagnostics\ directory, double-click on the MemoryDiagISO.exe file. A setup
menu appears.
2.
Follow the setup prompts to create a bootable ISO image of the memory diagnostic utility on a
DVD.
3.
Turn off the computer and restart it with the DVD installed in the optical drive. The computer will
boot to the DVD and initiate the memory diagnostic utility.
4.
Follow the diagnostic prompts to troubleshoot computer memory.
156
Chapter 6 Diagnostics and troubleshooting
ENWW

Advertisement

Table of Contents

   Related Manuals for HP Z200

This manual is also suitable for:

Z200

Comments to this Manuals

Symbols: 0
Latest comments: