HP Z200 Maintenance And Service Manual page 192

3. From the Computer Setup (F10) Utility menu, select File>Default Setup.
This restores the settings that include boot sequence order and other factory settings. However, it
does not force hardware rediscovery.
4. Choose Restore Factory Settings as Default, and the press
5. Select File->Apply Defaults and Exit, and then press
6.
Reset the computer passwords and configuration information, such as the system date and time.
NOTE:
180 Chapter 8 Configuring password security and resetting CMOS
This step does not clear the passwords.
F10 to accept.
F10 to accept.
ENWW