Download  Print this page

Access Panel Sensor (optional); Removing The Access Panel Sensor - HP Z200 Maintenance And Service Manual

Small form factor workstation.
Hide thumbs

Advertisement

6.
Install the security screw next to the middle front bezel release tab to secure the front bezel in
place.
Figure 5-7
7.
Replace the access panel.
8.
Reconnect all connections and equipment listed in the

Access panel sensor (optional)

The access panel sensor is a remote solenoid that detects when the access panel is opened. This section
describes how to remove and install the sensor.

Removing the access panel sensor

To remove the access panel sensor:
1.
Prepare the computer for servicing by following the
CAUTION:
data loss.
2.
Remove the access panel (see
76
Chapter 5 Replacing components
Installing the Front Bezel Security Screw
Failure to follow the predisassembly procedures can result in equipment damage or
Removing the access panel on page
Predisassembly procedures on page
Predisassembly procedures on page
72).
69.
69.
ENWW

Advertisement

Table of Contents

   Related Manuals for HP Z200

This manual is also suitable for:

Z200

Comments to this Manuals

Symbols: 0
Latest comments: