HP Z200 Maintenance And Service Manual page 40

Enable or disable POST Messages to change the display status of POST messages. POST
●
Messages disabled suppresses most POST messages, such as memory count, product name, and
other nonerror text messages. If a POST error occurs, the error is displayed regardless of the mode
selected. To manually switch to POST Messages Enabled during POST, press any key except
through F12.
● Specify an Ownership Tag, which appears when the computer is powered on or restarted.
Specify the Asset Tag or property identification number assigned by the company to this computer.
●
● Enable power-on password prompts during system restarts (warm-starts) and power on.
Hide or show the integrated I/O functionality, including serial, USB, or parallel ports, audio, or
●
embedded NIC. Hidden devices are inaccessible, which increases system security.
● Enable or disable removable media boot ability.
Enable or disable removable media write ability (if supported by hardware).
●
● Replicate the computer setup by saving system configuration information on CD or diskette and
restoring it on computers.
Execute self-tests on specified SATA hard disk drives (if supported by the drive).
●
28 Chapter 4 System management
F1
ENWW