Download  Print this page

HP Z200 Maintenance And Service Manual Page 141

Small form factor workstation.
Hide thumbs

Advertisement

4.
Remove the expansion card slot cover by pulling it up, out of the chassis.
TIP:
Grasp the slot cover between two fingers—one from the inside of the chassis, and one from
the outside.
Figure 5-75
5.
Angle the expansion card to Insert it into the expansion card guide.
6.
Align the PCIe card keyway with the slot key, and then firmly seat the card in the slot as shown
next.
Figure 5-76
ENWW
Removing the slot cover
Inserting the expansion card
Removing and installing components
129

Advertisement

Table of Contents

   Related Manuals for HP Z200

This manual is also suitable for:

Z200

Comments to this Manuals

Symbols: 0
Latest comments: