Download  Print this page

HP Z200 Maintenance And Service Manual Page 85

Small form factor workstation.
Hide thumbs

Advertisement

2.
Carefully place the hold-down on the inside of the side access panel with the foam padding facing
up:
Align the hold down with the edge of the hood label and the edge of the side access panel
(2).
Make sure the overhanging tab on the hold down faces toward the outside edge of the side
access panel with a gap of approximately 2 mm between the metal edge and the tab (3).
Figure 5-4
ENWW
Correct positioning for the card hold-down
Removing and installing components
73

Advertisement

Table of Contents

   Related Manuals for HP Z200

This manual is also suitable for:

Z200

Comments to this Manuals

Symbols: 0
Latest comments: