Efi/Posse Commands; Help; Syntax; Parameters - HP Integrity rx2620 User's & Service Manual

Table 48 EFI Commands (continued)
EFI Shell
Command
info fw
info io
lanaddress
info mem
info cpu
SERvice
errdump clear
mm
pdt
errdump cmc
errdump init

EFI/POSSE Commands

This section describes the EFI/POSSE commands developed for the server.
NOTE: EFI/POSSE are similar. EFI is an Intel specification, whereas POSSE is
the Hewlett Packard Enterprise implementation that helps Hewlett Packard Enterprise
support.

help

Provides information on the EFI Shell commands. It also has an additional feature to
help those familiar with the BCH menus of PA-RISC servers to adjust to the equivalent
functions in EFI.

Syntax

help [-b] <category>
help [-b] <cmd>
help [-b] bch <bchmenu> <bchcmd>

Parameters

-b
category
cmd
bch
bchmenu
bchcmd
BCH BCH Command Parameters
Command (PA-RISC)
Equivalent
(PA-RISC)
FwrVersion
IO
LanAddress
Memory
PRocessor
CLEARPIM
MemRead <addr> [<len>] [<type>]
page
deallocation
table (pdt)
processor [<proc>] [HPMC|LPMC|TOC|ASIC]]
internal
memory (PIM)
Enable page breaking
Category of commands to view help on commands
Shell command name on which to provide verbose information
Display the list of BCH commands and their corresponding EFI
BCH menu name taken from the top level of the BCH menu
BCH command on which to display information
Definition
Display firmware version
for PDC, ICM, and
complex
Display firmware version
for PDC, ICM, and
complex
Display core LAN station
address
Display memory
information
Display processor
information
Clear (zero) the contents
of PIM
Read memory locations
scope of page deallocation
Display or clear the page
deallocation table
Display PIM information
137