Table of Contents
Advertisement
5. Output Adjustment and How to Test
5.2 Alarm Output Test
When the ME-4201-NS96 type optional plug-in module is installed, simulated signal output to test the alarm output
circuit can be put out.
Operate it according to the following.
The following operation becomes possible when you turn on the power supply while pressing the
state of power failure.
It is impossible to test without the option module.
Test menu
SET
q Alarm output test
SET
Test menu
Set the test menu number to "1". (Set as shown in the right
display.)
+
–
,
q Test the alarm output.
When the
+
–
,
output are changed as following.
on
(Closed)
In case of test the other output, according to the 5.3 to 5.5,
continue to the test.
+
–
,
When the test is finished, turn off the power supply.
+
–
,
is pressed, the display and the contact
oFF
(Opened)
at the
DISPLAY
Advertisement
Table of Contents
