Table of Contents
Advertisement
4. Set-up
4.2 Basic Set-up
9 Time constant for
current demand
SET
Set-up menu
In the case of use only by the Set-up Menu 1 (basic set-up), go to "5. Operation" in page 37.
In the case to use additional functions, go to "Set-up Menus 2 to 8" in page 17 to 32.
If the contents in the Set-up Menu 1 are changed, the maximum value, minimum
Note
value, demand value of related measurement items will reset. (However, all of
the counting values are not reset.)
9 Set up the time constant for calculating current demand.
0 second
10 seconds
+
–
,
20 seconds
30 seconds
Note: Even when the display pattern not display the current demand, this screen appears. If the current demand is
not necessary, press the SET as it is.
According to the set-up diagram (page 13), save the changed
contents or continue to the other set-up menu.
+
–
,
40 seconds
3 minutes
7 minutes
50 seconds
4 minutes
8 minutes
1 minute
5 minutes
9 minutes
2 minutes
6 minutes
10 minutes
Set-up Menu 1
15 minutes
20 minutes
25 minutes
30 minutes
Advertisement
Table of Contents
