Table of Contents
Advertisement
6. Operation
6.3 Bar Graph Display
Measurement item to be displayed on bar graph can be selected. By displaying others than the measurement items
digitally displayed, 4 elements can be displayed at once.
● Explanation of bar graph
In the bar graph, measurement elements shown by " " or "
As for voltage, current, active power, reactive power, power factor, and frequency, they can be displayed on the
bar graph even if they are not set to display pattern.
● Selection of bar graph
–
Press
+
or
, to select measurement elements to be displayed on the bar graph.
The display element in the bar graph changes as follows by the display pattern that has been selected.
(i) When digital three-stage display are the same entire elements
[Three-phase 3 wire]
AVG (or ) of display
measurement element
[Three-phase 4 wire]
AVG (or ) of display
measurement
element
[Three-phase 3 wire]
Upper
V
[Three-phase 4 wire]
Upper
V
(L-N) AVG
Example of display of upper
stage element on bar graph
V
(L-L) AVG
V
V
(L-N) AVG
L-L AVG
A
(L-L) AVG
AVG
V
A
(L-L) AVG
Example of display of
power factor on bar graph
" are displayed.
A
AVG
A
AVG
W
var
PF
W
var
AVG
W
var
PF
W
var
PF
Hz
Lower
PF
Hz
Lower
Hz
Hz
Middle
Middle
Advertisement
Table of Contents
