6. Operation
6.1 Display Change
By pressing
, the measurement display will switch over.
DISPLAY
Example of display change (display pattern: P01)
First display
Note 1: When the display is changed by pressing DISPLAY , the following display is displayed just for a few seconds.
Note 2: Even in the maximum and minimum value display, when the DISPLAY is pressed, the display will switched over.
Reference
6.2 Phase Change
By pressing
, the current phase and the voltage phase will switch over.
PHASE
Example of display change
Current average value
Power (total)
Voltage average value
Note 1: Even in the maximum and minimum value display, when PHASE is pressed, the phase will switch over.
DISPLAY
Second display
Display number
Display items and sequences vary with display patterns (P01 to P13)
and additional display.
As for detailed display pattern, refer to page 48, 49.
PHASE
Current phase 1
Power (total)
Voltage phase 1-2
DISPLAY
Third display
This shows the second display among the 4 display.
PHASE
Current phase 2
Power (total)
Voltage phase 2-3
DISPLAY
Fourth display
PHASE
Current phase 3
Power (total)
Voltage phase 3-1
DISPLAY
PHASE