Enabling control of the IPSIs
1. Ensure that the IPSIs have the same, current firmware.
2. For duplicated IPSIs, enable IPSI duplication before you enable IPSI control. See
IPSI duplication (duplicated control network only)
system-parameters ipserver-interface and press Enter.
3. Ensure the IPSI Control of Port Networks: field is set to enabled.
4. Submit the screen to save the changes.
Verifying the license status
License File and verify that the license mode is now normal.
Enabling control of the IPSIs
on page 61. On the SAT, type change
Issue 8 May 2009
Enabling
63