Appendix B: Safety Information - TYAN MicroServer Series User Manual

The following section contains important safety information. Read this section
thoroughly before servicing the system.
General Safety
The following are guidelines to ensure general safety:
Maintain a clean environment during and after maintenance.

When lifting heavy objects:

1. Ensure you are standing on a clean stable surface to prevent slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you
attempt to lift.
4. Lift by standing or by pushing up with your leg muscles to prevent
additional strain on the muscles in your back. Do not attempt to lift any
objects that weigh more than 16 kg (35 lb) or objects that you think
are too heavy for you.
Do not perform any tasks that will create a hazard make the equipment unsafe.

Before you starting the system, ensure that all personnel are not in a

hazardous position.
Place removed covers and other parts in a safe place, away from

personnel, while servicing the system.
Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners

for your clothing to prevent an electrical discharge.
Wear safety glasses to prevent injury or a hazard to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires.

Replace any safety device that is worn or defective.
Reinstall all covers correctly before returning the system.

Electrical Safety
CAUTION:
!
Electrical current from the system or peripherals can be hazardous. To
avoid personal injury or damage to equipment, disconnect the attached
power cord(s) and peripherals before you open the system, unless
specifically instructed otherwise in a stated procedures.
Observe the following guidelines when working on the system.
Know the location of the room emergency power-off (EPO) switch,

disconnecting switch, or electrical outlet. In the event of an electrical
accident, you can operate the switch or unplug the power cord quickly.
Do not work alone under hazardous conditions or near equipment that has

hazardous voltages.

Appendix B: Safety Information

http://www.tyan.com