Installing A System Board - TYAN MicroServer Series User Manual

USB Slots
Power Button/
System Power LED Slot

6.8.4 Installing a System Board

1. Align front of the system board, DIMM slots positioned in the front, with the front of the
blade housing.
2. Slide the front of the system board into the housing.
3. Lower the system board into the housing making sure the screw holes on the system
board align with the screw nuts on the board housing.
4. Secure the system board to the blade housing with the screws (Figure 4-13):
B5519 System x 5 screws
5. Install the compute blade into the chassis. See
Figure 4-13. Removing the B5519 System Board
http://www.tyan.com
Installing a Compute Blade.
System Board